For teams that develop technical products

“It can’t get any smaller.”

I hear that sentence a lot. That is exactly when it gets interesting.

Arrange a call

When a product is too big, too expensive or technically stuck – or the next generation needs to make a real leap – I step in. Together with your team I rethink the system and develop the solution further until the idea becomes a robust prototype.

In one project: 58 % less connection area.

Anyone can do a little better. I challenge your team to go beyond its own limits of thinking – because nobody becomes market leader with small steps today.

Gregor Panitz · development engineer since 1999 · involved in more than 45 patent applications

Gregor Panitz working with a team – explaining a technical problem at flip charts
Gregor Panitz working with a team – explaining a technical problem at flip charts
Challenges

Where are you stuck right now?

Anyone who has known their product for years also knows every reason why something cannot be done. An outside view does not know these reasons – and therefore keeps asking.

“It can’t get any smaller.”

I rethink the system from its function instead of polishing the existing design.

Result from a project58 % less connection areaSealed connector system. The solution came from reducing the system to its basic function and a targeted root-cause analysis.

“There is nothing left to gain.”

I find out which functions your product really needs – and what can go.

Result from a project−20 % copper · −22 % width · −14 % heightSingle-pole high-voltage connector system from e-mobility. The saving came from questioning “that’s how it has always been done”.

“The next generation should be a real leap.”

Together we clarify where the system can develop and set a well-founded target picture.

Result from a project15 protectable ideas in about 5 monthsConnector system for charging and traction paths. With the team I worked steadily towards the target picture of the new generation; together we cleared the technical obstacles systematically.

“The project is stuck.”

With your team I go back to the point where things got tight and develop new technical routes from there.

Result from a projectFrom the dead end to new solutionsThe project had been “designed into a corner”: the chosen route had become too expensive and too complex. Using a network of the problems, the team found its way back and on to new solutions.

“A third-party patent is in our way.”

I break the claim down into features and develop technical routes around it. No legal assessment.

Result from a projectFrom 2 weeks to 90 minutesContacting in e-mobility: a patent blocked what seemed to be the only solution. By hand, the design-around took 2 weeks – inventMAP later found the same approaches in about 90 minutes.

“Costing our design variants takes too long.”

I estimate the manufacturing cost of each variant – before a single one has been designed in detail.

Result from a projectHours instead of 3 weeks · 38 % lower manufacturing costWith inventMAP, the most promising variants were narrowed down in hours. Designing them in detail for a conventional cost calculation would have taken more than 3 weeks.

Examples from real projects – deliberately anonymised. Many come from connection technology, because that is where I come from. The approach starts from the functions of a product, not from the industry: open examples from medical technology and climate technology are on inventmap.de →

Three ways to the result

You decide who solves it.

Many roads lead to the solution. Which one is best depends on your project, on how you work, on your knowledge and mine, and on your team’s capacity. We clarify that in the first call.

Have it solved

  • You give me the task.
  • I deliver the result: concept, analysis or cost calculation.
  • If needed, I bring in partners.

Solve it together

  • The first case is worked on in your company.
  • Your people work on it – on the real product.
  • After that you know the way.

Solve it yourself

How I work

Not a consulting project alongside development. Work on the real product.

  1. Clarify the topic

    Together we look at the real problem, the limits and the goal. Often it already becomes clear here whether the actual problem sits somewhere else.

  2. Understand the system

    Functions, costs, installation space, interfaces, manufacturing processes, patents and earlier decisions are opened up as far as the topic requires.

  3. Set the target picture

    Not “5 % would be nice”, but a bold target that seems impossible at first – and is technically well-founded all the same.

  4. Develop and test solution paths

    Concepts emerge together with your team. Good ideas are not just collected but tested against boundary conditions, follow-on problems and feasibility.

  5. Keep going until the prototype

    With bold targets, obstacles are inevitable. The usual reaction is to switch to the simpler idea. I stay on it and, with your team, solve the follow-on problems one by one – until the prototype stands.

Methods are tools. What counts is whether they make the technical problem easier to solve.

The same goes for AI. It has become such a powerful tool in development that I do not leave it out – working without it will soon be like designing without CAD.

inventMAP, the software by inventissimo

inventMAP grew out of this work.

It makes part of my thinking and knowledge work usable as software – with three strengths: third-party patents in view, problems and solutions in one network, manufacturing costs from the first idea.

Made for every project – not only when things get stuck.

To the inventMAP software →
inventMAP: problem–solution network of a project – two problems, the solution ideas with sketches below, and the legend of node and link types on the right.
Actual product view · click to enlarge (example project in German)
Gregor Panitz, development engineer
Who is behind it

Development engineer – not a slide consultant.

I am Gregor Panitz, a freelance development engineer. I have been developing technical products since 1999 – hands-on, in a leading role or in a supporting one, in large corporations as well as in small and medium-sized companies. My focus is on electrical contact and connector systems. I was involved in more than 45 patent applications.

inventissimo is my engineering office, inventMAP my software. You talk and work with me personally. If needed, I bring in partners.

I work in German, English and Polish – often with international teams, for example from Germany, France, Poland, the Czech Republic, Hungary, Morocco, India and China.

  • Product development since 1999
  • Corporations · mid-sized · small companies
  • 45+ patent applications
  • Automotive · e-mobility · connection technology
  • hands-on development work through to the prototype
  • German · English · Polish

“Often the better question is not: what is still missing? But: what can go?”

Over two full days he brought a project that was thought to be stuck back to life. An asset for any team.

Expert for norms & standards · workshop participant

Whether innovation, root-cause analysis or cost reduction – constructive, solution-oriented cooperation on every topic. Recommended without reservation.

Head of product development · electrical engineering / industry

Gregor asks the right questions and brings teams together as equals. A strong partner for companies that want to drive innovation systematically.

Expert for HV connectors & IEC standardisation · e-mobility

Quotes translated from German.

Confidentiality

What happens in the project stays in the project.

I work on new and often secret projects. My clients’ knowledge stays with my clients.

Especially with new product generations, cost structures, patents or concepts that have not yet been published, confidentiality is not a formality. It is the precondition for being able to talk openly about the real problem.

That is why all examples on this page are anonymised.

Contact

Let’s talk.

Where is your team stuck right now? In a first call we look at it together. If I can help in a meaningful way, I will say how I would get involved. If not, I will say that just as clearly.

The button opens my booking calendar (Microsoft Bookings) in a new tab.

You do not need a finished task description yet. The technical problem is enough to start with. Afterwards you will know whether and how I can help.

Contracting party and invoicing party Dipl.-Ing. (FH) Gregor Panitz · Ingenieurbüro Gregor Panitz
Dörrgasse 1, 55270 Sörgenloch, Germany
VAT identification number: DE259728548 Please use this name for purchase orders.
inventMAP – actual product view
inventMAP: problem–solution network of a project – two problems, the solution ideas with sketches below, and the legend of node and link types on the right.